Table of Contents
Minimum requirements required for a Saa S-based implementation of Fire Scope SPM.
Overview
The following outlines the minimum requirements required for a Saa S-based implementation of Fire Scope SPM.
Port Communication Requirements
In a Saa S implementation of Fire Scope SPM, a Fire Scope Edge virtual machine is deployed on-premise to perform discovery and data collection. All communication between the Edge device and the Fire Scope cloud is initiated by the Edge device for security purposes. The following ports will need to be open for successful communication between Fire Scope SPM and each Edge device.
- If using Fire Scope Service Insight, it will need to be able to connect to your SPM cloud over port 9540
- If Fire Scope Analytics is part of this implementation, port 40000
Edge Device System Requirements
The Fire Scope Edge virtual machine is responsible for executing Discovery, all data collection, and accurately forwarding all of this data to the Fire Scope SPM cloud. Edge devices can be physical or virtual appliances. The number of Configuration Items it collects from, frequency of polling, and scope of data collection methodologies impact its performance.
- 8 v CPUs
- 12 GB of RAM
- 120 GB for Primary Disk
Note: The storage requirement for the edge device is large to ensure sufficient storage space for caching in case of loss of connectivity with the Fire Scope SPM cloud.
Web Browser
Fire Scope SPM supports the following Web browsers:
| Internet Explorer | 8 and above *Compatibility mode not supported. HTML5 is not natively supported in versions older than 9. |
| Fire Fox | 6 and above |
| Safari | 3.2 and above |
| Chrome | 6.0 and above |
Additionally, the following requirements apply to all browsers:
- Java Script is enabled
- Minimum resolution: 1024 x 768
On-Site Implementations Minimum Requirements
If you are opting for a private instance of Fire Scope SPM, there are additional requirements needed for the Fire Scope SPM Cloud itself. All of the previous minimum requirements are still required.
Ensure that you meet the following environment requirements to deploy Fire Scope SPM successfully.
| ESX Servers | 3 (5 preferred) |
| Minimum Instances | 3 x EWC 2 x EAC 2 x ESC 1 x Edge Device |
| VM Environment | VMware v Sphere 5.5+ ESX servers with proper configuration (Key settings are correct Time Source and Hostname) Standard VMware images, with VMDK support |
| Supported Storage | FC SAN (preferred) Fast i SCSI Direct Attached SAS *NAS is not supported. |
| Network | Fast Ethernet, fully switched Distributed v Switches for ESX |
All primary SPM components (EWC, EAC, and ESC) communicate over TCP/IP Protocol within the SPM Cloud Environment. Each layer must have the appropriate access to the other layers in order for the application to perform optimally. As the SPM Cloud Environment is typically housed in the same location, no special firewall rules or protocols should be required.